Register
Is a type of construction where the main load-bearing elements are hung from suspension cables that are then suspended from vertical supports anchored into the ground or a riverbed. a. Domino c. Ferroconcrete
233k views
2 votes
Is a type of construction where the main load-bearing elements are hung from suspension cables

that are then suspended from vertical supports anchored into the ground or a riverbed.
a. Domino
c. Ferroconcrete
d. Suspension
b. Cantilever
Please select the best answer from the choices provided
OA
0000
4

User Ander Acosta
by
7.9k points

1 Answer

6 votes

Final answer:

Suspension is a type of construction where the main load-bearing elements are hung from suspension cables that are then suspended from vertical supports anchored into the ground or a riverbed.


Step-by-step explanation:

The correct answer is Suspension. Suspension is a type of construction where the main load-bearing elements are hung from suspension cables that are then suspended from vertical supports anchored into the ground or a riverbed. A famous example of a suspension bridge is the Golden Gate Bridge in San Francisco, which hangs from suspension cables that are supported by two tall towers. The cables help distribute the weight of the bridge evenly, allowing it to span great distances.


Learn more about Suspension bridges

User Tomato
by
7.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.1m questions

10.8m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!