Register
The ladder should be long enough so that the work can be done at least this many rungs from the top. Work should be at least ______ rungs from the top.
62.3k views
5 votes
The ladder should be long enough so that the work can be done at least this many rungs from the top. Work should be at least ______ rungs from the top.

User Kishanio
by
8.2k points

1 Answer

2 votes

Final answer:

According to OSHA safety guidelines, a person working on a ladder should stand at least 3 rungs from the top to ensure support and balance, reducing the risk of accidents.

Step-by-step explanation:

Working on a ladder should always prioritize safety. Therefore, the Occupational Safety and Health Administration (OSHA) provides guidelines stating that work should be done at least 3 rungs from the top of the ladder to reduce the risk of accidents.. This is to ensure necessary support and balance while working at height. Ignoring this precaution can result in accidents and injuries that are easily preventable by adhering to the rule.

Learn more about Ladder Safety

User Setori
by
7.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!