Register
Tegan is creating a 3D model of a tunnel. He has created the profile of the tunnel by extruding the vertices to create a thin rectangular shape. All he needs to do now is use the spin tool to rotate the
62.8k views
5 votes
Tegan is creating a 3D model of a tunnel. He has created the profile of the tunnel by extruding the vertices to create a thin rectangular shape. All he needs to do now is use the spin tool to rotate the shape around the axis and create the tunnel. What should he set the Angle to when enabling the spin tool so that it creates the tunnel resting on the ground and not a circular pipe? 3D modeling 10 grade

A.
90 degrees

B.
180 degrees

C.
270 degrees

D.
360 degrees

User Ryan Conrad
by
8.1k points

1 Answer

5 votes

Answer:

Tegan wants to create a tunnel that rests on the ground, he should set the angle to 360 degrees when enabling the spin tool. This will cause the shape to be rotated around the axis in a full circle, creating a tunnel shape that sits flat on the ground. A 360-degree rotation will create a full revolution around the axis and will

User Asaaki
by
7.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.4m questions

11.0m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!