Register
Gasoline flows through the 2 cm diameter hose in a gas station at a speed of 0.7 m/s. If the gas tank in my car has a capacity of 10.6 gallons (0.04 m3), how long does it tank to fill my gas tank? If the
217k views
1 vote
Gasoline flows through the 2 cm diameter hose in a gas station at a speed of 0.7 m/s. If the gas tank in my car has a capacity of 10.6 gallons (0.04 m3), how long does it tank to fill my gas tank? If the density of gasoline is 708 kg/m3, what is the mass flow rate of gasoline in the hose?

User Jowey
by
6.2k points

1 Answer

5 votes

Answer: Time to fill tank= 181.983s

Mass flow rate of gasoline = 0.1556kg/s

Step-by-step explanation:

Gasoline flows through the 2 cm diameter hose in a gas station at a speed of 0.7 m-example-1
User Bresiu
by
5.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.4m questions

8.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!