Register
The principal component in glass manufacturing is_____
167k views
0 votes
The principal component in glass manufacturing is_____

User Hchw
by
5.1k points

1 Answer

0 votes

Answer:

Silica is the principal component in glass.

Step-by-step explanation:

Step1

Glass is the amorphous solid and transparent. Glass products have many of the shapes and design that are available in market.

Step2

Natural quartz is the primary source of glass in sand. Silica is the principal component in approximately all glass. Lime stone, soda ash and aluminum oxide are added in the galas for desired properties depending upon application. So, silica is the principal component in glass.

User Aba
by
4.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.7m questions

7.4m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!