Register
Technician A says that gear lube and bearing grease cannot be substituted due to the different housing and seal designs each lubricant demands in a vehicle. Technician B says that gear lube is thicker
115k views
0 votes
Technician A says that gear lube and bearing grease cannot be substituted due to the different housing and seal designs each lubricant demands in a vehicle. Technician B says that gear lube is thicker than bearing grease. Who is correct?

User Loreley
by
7.4k points

1 Answer

4 votes

Answer:neither

Step-by-step explanation:

Whether a lube and grease are interchangeable depends on the characteristics of each because they come in many different grades.

User John Weldon
by
7.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.0m questions

11.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!