Register
A Carnot engine is operated between two heat reservoirs at temperatures of 520 K and 300 K. It receives heat from the 520 K reservoir and discards heat to the 300 K reservoir in each cycle. What is the
74.3k views
1 vote
A Carnot engine is operated between two heat reservoirs at temperatures of 520 K and 300 K. It receives heat from the 520 K reservoir and discards heat to the 300 K reservoir in each cycle. What is the thermal efficiency of the engine?

User JatSing
by
6.3k points

1 Answer

3 votes

Answer:

Hook's law holds good up to. A elastic limit. B. plastic limit. C.yield point. D.Breaking point

User Shivam Parmar
by
5.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.4m questions

9.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Link Copied!