Register
Technician a says that brake fade occurs if the brakes create more heat then that can dissipate technician b says that brake fade occurs by a fast dissipate of heat in the brake system that causes a glazing
124k views
0 votes
Technician a says that brake fade occurs if the brakes create more heat then that can dissipate technician b says that brake fade occurs by a fast dissipate of heat in the brake system that causes a glazing on the brake lining

User Hgdeoro
by
7.4k points

1 Answer

2 votes

Answer:

Both A and B

Step-by-step explanation:

A car brake system is used to bring to a halt, a moving car. The car brake system is made of several moving and hydraulic parts, which can stiffen or fade due to heat dissipation.

When brakes fade due to overheating of the brake fluid, it is called the hydraulic fade.

User Sverrisson
by
6.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.8m questions

10.4m answers

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Link Copied!