Register
What type of foundation do engineers use for a small and light building and when the load of the building is borne by columns? A. individual footings B. strip footings C. mat foundations D. end-bearing
226k views
0 votes
What type of foundation do engineers use for a small and light building and when the load of the building is borne by columns? A. individual footings B. strip footings C. mat foundations D. end-bearing piles E. friction piles

User Shazad
by
4.7k points

2 Answers

4 votes

Answer:

Individual footings

Step-by-step explanation:

A

User Tames
by
5.6k points
1 vote

Answer:

A.

Step-by-step explanation:

Individual footings are the commonest, and they are often used if the load of the building is borne by columns. Typically, every column will have an own footing. The footing is usually only a rectangular or square pad of concrete on which the column is erected

User Kindofgreat
by
5.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.7m questions

7.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!