Register
Ascertain who the stakeholders in this project might be and how you will communicate the impending changes with them
40.1k views
5 votes
Ascertain who the stakeholders in this project might be and how you will communicate the impending changes with them

User Victor Molina
by
8.1k points

1 Answer

7 votes

Answer:

y que cierren el orto si no demuestran nada

User Finisinfinitatis
by
8.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.2m questions

11.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
A 200 g projectile is fired with a velocity of 900 m/s toward the center of a 15 kg wooden block which rests on a rough surface. If the projectile penetrates and emerges from the back at a velocity of
A face milling operation is to be performed on cast iron. Tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches, f = 0.001 inch/tooth, and N = 250 RPM. Find: MRR,
A three-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 3.5 mm (0.14 in.); the specimen fractured at a load of 950 N (215 lbf) when the distance
Link Copied!