Question

The three suspender bars AB, CD, and EF are made of A-36 steel and have equal cross-sectional areas of 500 mm2. Determine the average normal stress in each bar if the rigid beam is subjected to a force of P

Answer 1

hello a diagram attached to your question is missing attached below is the missing diagram

The three suspender bars AB, CD, and EF are made of A-36 steel and have equal cross-sectional areas of 500 mm2. Determine the average normal stress in each bar if the rigid beam is subjected to a force of P = 70kN , let d = 2.4 m , L = 4m

Answer :

Stress = force / area

for Bar 1 = (40.03 * 1000) / 500 = 80.06 MPa

Bar 2 = ( 23.33 * 1000 ) / 500 = 46.66 MPa

for Bar 3 = ( 5.33 * 1000 ) / 500 = 10.66 MPa

Step-by-step explanation:

Given data:

Type of steel = A-36

cross-sectional area = 500 mm^2

Calculate the average normal stress in each bar

we have to make some assumptions

assume forces in AB, CD, EF to be p1,p2,p3 respectively

∑ Fy = 0 ; p1 + p2 + p3 = 70kN ---------- ( 1 )

∑ Mc = 0 ; P1 * d - p * d/2 - p3 * d = 0

where d = 2.4 hence ; p1 - p3 = 35 -------- ( 2 )

Take ; Tan∅

Tan∅ = MN / 2d = OP/d

i.e. s1 - 2s2 - s3 = 0

`(P1L)/(AE) - (2P2)/(AE) + (P3L)/(AE) = 0`

L , E and A are the same hence

P1 - 2p2 + p3 = 0 ----- ( 3 )

Next resolve the following equations

p1 = 40.03 kN, p2 = 23.33 kN, p3 = 5.33 kN

Stress = force / area

for Bar 1 = (40.03 * 1000) / 500 = 80.06 MPa

Bar 2 = ( 23.33 * 1000 ) / 500 = 46.66 MPa

for Bar 3 = ( 5.33 * 1000 ) / 500 = 10.66 MPa