Register
What is the significance of an extension line in an engineering drawing? A. the line shows the limits of a dimension B. the line shows dimensions not used in fabrication C. the line is perpendicular to
160k views
1 vote
What is the significance of an extension line in an engineering drawing?

A.
the line shows the limits of a dimension
B.
the line shows dimensions not used in fabrication
C.
the line is perpendicular to the dimension line used to show a feature
D.
the line shows visible features of the figure
E.
the line shows hidden features of the figure

User Lindsay Landry
by
7.4k points

2 Answers

2 votes

Answer:

c

Step-by-step explanation:

c

User Jpreynat
by
6.9k points
4 votes


C. the line is perpendicular to the dimension line used to show a feature
User Richard Christensen
by
7.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.3m questions

10.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!