Question

HEY CAN ANYONE PLS ANSWER DIS!!!!!!

Answer 1

1. Separating iron from mixture

• Provided a magnet
• moved the magnet close to the mixture
• separated the magneted iron from the magnet.

2. Separating sand from mixture

• poured the mixture in a separation funnel
• filtered off the sand from the mixture.

3. Separating Salt mixture

• boild the mixture
• continued heating to dryness
• the remimants left behind is the salt

Answer 2

Step-by-step explanation:

1.wrap bar magnet in a plastic baggie and remove the iron filings from the mixture by using a bar magnet. Place a small piece of scrap paper on the scale and “tare” the scale. Then place filings on the scrap paper and record (e) the mass of the iron filings. Don't throw out the iron–save it to be recollected.

2.When sand is added to water it either hangs in the water or forms a layer at the bottom of the container. Sand therefore does not dissolve in water and is insoluble. It is easy to separate sand and water by filtering the mixture. Salt can be separated from a solution through evaporation.

3.Sand (mostly silicon dioxide) is not.

Pour the salt and sand mixture into a pan.

Add water. ...

Heat the water until the salt dissolves. ...

Remove the pan from heat and allow it to cool until it's safe to handle.

Pour the salt water into a separate container.

Now collect the sand.

Pour the salt water back into the empty pan.

Heat the salt water until the water boils. Continue boiling it until the water is gone and you're left with the salt.

Another way you can separate the salt water and sand is to stir up the sand/salt water and pour it through a coffee filter to capture the sand.