Register
Which construction material can workers erect at the fastest rate?
192k views
5 votes
Which construction material can workers erect at the fastest rate?

User FFMG
by
5.4k points

2 Answers

5 votes

Answer:

Creation benefits

Clarification:

On location development can positively start all the more immediately when you are utilizing solid, stone, or block. Notwithstanding, absolute development time will fall behind that of working with steel. These materials expect time to get ready and fix; and they bring about more waste to move off site and discard.

User Valjas
by
5.6k points
4 votes

Answer:

Fabrication benefits

Step-by-step explanation:

Onsite construction can certainly begin more quickly when you are using concrete, stone, or brick. However, total construction time will lag behind that of building with steel. These materials require time to prepare and cure; and they result in more waste to move off site and dispose of.

User Tom Wayne
by
5.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.0m questions

7.8m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!