Register
An engine has one cylinder that measured substantially lower than specifications on a compression test. Technician A says a cylinder leakage test should be performed only on the cylinder with low compression
174k views
5 votes
An engine has one cylinder that measured substantially lower than specifications on a compression test. Technician A says a cylinder leakage test should be performed only on the cylinder with low compression pressure. Technician B says a cylinder leakage test should be performed on all cylinders. Who is correct

User Kazade
by
6.1k points

1 Answer

4 votes

Answer:

Technician B

Explanation: A cylinder leakage test should be performed on all cylinders, to ensure irregular function.

User SyntaxRules
by
6.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.2m questions

9.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!