Register
A cylinder 8 in. in diameter and 3 ft long is concentric with a pipe of 8.25 in internal diameter. Between the cylinder and the pipe there is an oil film. What force is required to move the cylinder along
38.9k views
0 votes
A cylinder 8 in. in diameter and 3 ft long is concentric with a pipe of 8.25 in internal diameter. Between the cylinder and the pipe there is an oil film. What force is required to move the cylinder along the pipe at a constant velocity of 3 ft/s? The kinematic viscosity of the oil is 0.006 ft2 /s; the SG is 0.92.

User David Carmo
by
7.5k points

1 Answer

7 votes

Answer:

What force is requiere to move the cylinder along

Step-by-step explanation:

The kinematic viscosity of the ol is 0.006 fr2

User Alex Kombo
by
7.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.6m questions

11.2m answers

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!