Register
Load 1 absorbs an average power of 60 kW and delivers 70 kVAR of reactive power; Load 2 has an impedance of (24+j7)Ω. The voltage at the terminals of the loads is 17002–√cos120πtV. a) find rms value of
140k views
3 votes
Load 1 absorbs an average power of 60 kW and delivers 70 kVAR of reactive power; Load 2 has an impedance of (24+j7)Ω. The voltage at the terminals of the loads is 17002–√cos120πtV.

a) find rms value of source voltage
b) what is the phase difference between load voltage and source voltage
c) does the load voltage lead or lag the source voltage

Load 1 absorbs an average power of 60 kW and delivers 70 kVAR of reactive power; Load-example-1
User Bruno Koga
by
4.3k points

1 Answer

8 votes
23+j7 is the answer
User Untrots
by
5.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.2m questions

6.8m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Link Copied!