Answer:
The thermal conductivity detector (TCD) is a widespread detector dependent on the estimation of the thermal conductivity of a gas. It measures the distinction in heat conductivity between unadulterated carrier gas and carrier gas containing test parts.
Step-by-step explanation:
When you have two parallel tubes both containing gas and coils being heated, thermal conductivity occurs. The gases are inspected by comparing the rate of heat loss in the heated coils in the gas. One of the cylinders has a reference gas and the other cylinder contains the sample to be tested. A thermal conductivity detector will sense the change in the thermal conductivity and compares it to a reference stream of carrier gas. An analyte washed from the section causes the reduction of the thermal conductivity of the effluent and produces a detectable signal. The thermal conductivity of most compounds is less than the thermal conductivity of hydrogen and helium.