Register
Piping layout carrying liquid water at 70°F at a volumetric flow rate of 0.2 is composed of four sections of 4-in. Diameter steel pipe having a total length of 550 ft, three 90" rounded elbows, and a fully
3.4k views
5 votes
Piping layout carrying liquid water at 70°F at a volumetric flow rate of 0.2 is composed of four sections of 4-in. Diameter steel pipe having a total length of 550 ft, three 90" rounded elbows, and a fully open valve. Evaluate Equation 2.31, in if the valve is (a) a globe valve, (b) a gate valve.

User Silverclaw
by
6.1k points

1 Answer

0 votes

Answer:I have no clue if you find out let me know

Step-by-step explanation:

User Aspartame
by
5.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.5m questions

8.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!