Register
Hot water (cph = 4188 J/kg∙K) enters a thin-walled double-pipe counterflow heat exchanger at 2.5 kg/s and 100°C. The overall heat transfer coefficient and the surface area are 1000 W/m2 ∙K and 21 m2 ,
197k views
2 votes
Hot water (cph = 4188 J/kg∙K) enters a thin-walled double-pipe counterflow heat exchanger at 2.5 kg/s and 100°C. The overall heat transfer coefficient and the surface area are 1000 W/m2 ∙K and 21 m2 , respectively. For the cold stream, cold water (cpc = 4178 J/kg∙K) enters the heat exchanger at 5 kg/s and 20°C. (a) Determine the heat transfer rate for the heat exchanger (in W)

User Kiradotee
by
8.3k points

1 Answer

2 votes

Answer:

The heat transfer rate for the exchanger is 6.68 × 10⁵ W

Step-by-step explanation:

Hot water (cph = 4188 J/kg∙K) enters a thin-walled double-pipe counterflow heat exchanger-example-1
Hot water (cph = 4188 J/kg∙K) enters a thin-walled double-pipe counterflow heat exchanger-example-2
Hot water (cph = 4188 J/kg∙K) enters a thin-walled double-pipe counterflow heat exchanger-example-3
Hot water (cph = 4188 J/kg∙K) enters a thin-walled double-pipe counterflow heat exchanger-example-4
User Limin
by
8.2k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!