Register
Technician A says that the cylinders should be bored and/or honed to match the size of the pistons to be used. Technician B says that bolt holes should be chamfered and cleaned with a thread chaser before
237,383 views
23 votes
23 votes
Technician A says that the cylinders should be bored and/or honed to match the size of the pistons to be used. Technician B says that bolt holes should be chamfered and cleaned with a thread chaser before assembly. Who is right

User JasonYun
by
3.4k points

1 Answer

11 votes
11 votes

Answer:Both Technician A and Technician B are right.

Explanation: The cracks in an engine can be detected when the engines are thoroughly cleaned because the transmission vent is basically designed to vent hot air.

Also pressure testing can equally detect cracks easily. When you increase the pressure,you will notice leaks from the blocks or cylinder indicating a crack on them.

User Yennefer
by
3.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

1.6m questions

2.0m answers

Other Questions

What is ventilation system on a boat for
Consider the following chain-reaction mechanism for the high-temperatureformation of nitric oxide, i.e., the Zeldovich mechanism: O + N2------ NO + N Reaction 1 N + O2------ NO + O Reaction 2 A. Write
Christopher has designed a fluid power system that repeatedly gets clogs. Which of the following objects should he choose to add to his fluid power system to prevent these clogs in the future? filter pipe
Indicate the specific way that each of the transistor terminals have to be connected in the circuit​
2. The following segment of carotid artery has an inlet velocity of 50 cm/s (diameter of 15 mm). The outlet has a diameter of 11mm. The pressure at inlet is 110 mm of Hg and pressure at outlet is 95 mm
Link Copied!