Register
Determine the MI of the beam's cross-sectional area about its centroidal axes. 12.7 mm 165 mm 165 mm 165 mm 12.7 mm 12.7 mm ​
126k views
24 votes
Determine the MI of the beam's cross-sectional area about its centroidal axes. 12.7 mm 165 mm 165 mm 165 mm 12.7 mm 12.7 mm ​

Determine the MI of the beam's cross-sectional area about its centroidal axes. 12.7 mm-example-1
User Brooks Moses
by
4.5k points

1 Answer

7 votes

Answer:

A uniform T-section beam is 100 mm wide and 150 mm deep with a flange thickness of 25 mm and a web thickness of 12 mm. If the limiting bending stresses for the material of the beam are 80 MN/m2 in compression and 160 MN/m2 in tension, find the maximum u.d.l. that the beam can carry over a simply supported span of 5 m.

Step-by-step explanation:

hope this helps if not let me know

User Kdureidy
by
4.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.1m questions

6.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!