Register
A insulated vessel s has two compartments separated by a membreane. On one side is 1kg of steam at 400 degC and 200 bar. The other side is evacuated . The membrane ruptures, filling the entire volume.
158k views
2 votes
A insulated vessel s has two compartments separated by a membreane. On one side is 1kg of steam at 400 degC and 200 bar. The other side is evacuated . The membrane ruptures, filling the entire volume. The finial pressure is 100bar. Determine the final temperature of the steam and the volume of the vessel.

User Glarkou
by
8.1k points

1 Answer

2 votes

Answer:

See explaination

Step-by-step explanation:

See attachment for the detailed step by step solution of the given problem.

A insulated vessel s has two compartments separated by a membreane. On one side is-example-1
User Rmirabelle
by
8.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.9m questions

11.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Where are all the controls on most circuits?
Link Copied!