Answer:
Option A is correct.
The hydraulic pressure in a closed hydraulic brake system is constant.
Step-by-step explanation:
The hydraulic brake system works on the principle of pressure transmission. It is termed a closed hydraulic brake system when there is no leakage of fluid all through the setup. The transmission works on the basis of Pascal's law for pressure and it explains that pressure applied to a fluid is transmitted undiminished to every part of the fluid.
The force applied on the brake pedals by the driver at the controlling end of the hydraulic system is transmitted by the pushrod on the piston(s) in the master cylinder.
This causes fluid from the brake fluid reservoir to flow into a pressure chamber. This in turn causes an increase in the pressure of the entire hydraulic system, forcing fluid through the hydraulic lines toward the caliper(s) where it then acts upon the caliper piston(s).
The force applied on the brakes pedal, F₁,
is applied on the cross sectional Area of the master piston, A₁ and this is transmitted in terms of pressure by the fluid (with no loss in pressure, that is, constant pressure, if the hydraulic braking system is especially a closed one) through the callipers to the calliper(s) pistons.
Hope this Helps!!!