Question

A cable-operated clutch is being adjusted. Technician A says that free travel is measured at the clutch pedal and should be between 3/4 and 1 inch (19 to 25 mm). Technician B says that the clutch spin-down time should be less than two seconds. Which technician is correct?

A) Technician A only

B) Technician B only

C) Both technicians

D) Neither technician

Answer 1

Answer: A

Technician A only

Step-by-step explanation:

On a cable-operated clutch, the adjustment is made at the cable end. The clearance is usually measured either at the operating lever or at the pedal.

To perform efficiently, the clutch needs the right amount of play in the linkage between the foot pedal and the clutch operating lever

Anything less than the correct amount of free play (or clearance ) will result in clutch slip, because the pressure plate will be unable to exert its full pressure on the friction plate .

Failure to cure this fault will quickly lead to a burned-out friction plate, and possibly a ruined pressure plate.