Register
An inflatable structure has the shape of a half-circular cylinder with hemispherical ends. The structure has a radius of 40 ft when inflated to a pressure of 0.60 psi. A longitudinal seam runs the entire
86.0k views
2 votes
An inflatable structure has the shape of a half-circular cylinder with hemispherical ends. The structure has a radius of 40 ft when inflated to a pressure of 0.60 psi. A longitudinal seam runs the entire length of the structure. The seam fails in tension when the load is 600 pounds per inch of seam. What is the factor of safety with respect to longitudinal seam failure?

User Atiqur
by
5.6k points

1 Answer

2 votes

Find the given attachment

An inflatable structure has the shape of a half-circular cylinder with hemispherical-example-1
User Joshnh
by
5.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.3m questions

6.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!