Register
The pressure drop, Δp, along a straight pipe of diameter D has been experimentally studied, and it is observed that for laminar flow of a given fluid and pipe, the pressure drop varies directly with the
52.9k views
1 vote
The pressure drop, Δp, along a straight pipe of diameter D has been experimentally studied, and it is observed that for laminar flow of a given fluid and pipe, the pressure drop varies directly with the distance, l, between pressure taps. Assume that Δp is a function of D and l, the velocity, V, and the fluid viscosity, μ . Use dimensional analysis to deduce how the pressure drop varies with pipe diameter.

User Bakir Jusufbegovic
by
6.9k points

1 Answer

2 votes

Answer:

pressure drop varies with pipe diameter.

Step-by-step explanation:

Solutions have been attached as files, please check.

The pressure drop, Δp, along a straight pipe of diameter D has been experimentally-example-1
The pressure drop, Δp, along a straight pipe of diameter D has been experimentally-example-2
The pressure drop, Δp, along a straight pipe of diameter D has been experimentally-example-3
The pressure drop, Δp, along a straight pipe of diameter D has been experimentally-example-4
The pressure drop, Δp, along a straight pipe of diameter D has been experimentally-example-5
User DKA
by
6.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.8m questions

10.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!