Register
1. You are asked to select a sensor that will follow the temperature in the piston of an internal combustion engine that will operate at 8000 RPM. The temperature will vary roughly sinusoidally during
228k views
4 votes
1. You are asked to select a sensor that will follow the temperature in the piston of an internal combustion engine that will operate at 8000 RPM. The temperature will vary roughly sinusoidally during the cycle and the design requirement is that the sensor reach at least 90% of the peak temperatures. What must the time constant be

User Erik Doernenburg
by
8.0k points

1 Answer

2 votes

Answer:

6.514×10^5

Step-by-step explanation:

Please kindly check attachment for the step by step solution of the given problem.

1. You are asked to select a sensor that will follow the temperature in the piston-example-1
User Anders Martini
by
8.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!