Register
Answer True of False to the following statements. a. Above its glass transition temperature, a polymer is glassy and brittle. b. Below the glass transition temperature, polymer chains lose their mobility
61.2k views
4 votes
Answer True of False to the following statements.

a. Above its glass transition temperature, a polymer is glassy and brittle.
b. Below the glass transition temperature, polymer chains lose their mobility (they are less capable of bending, flexing, raveling, and rotating about covalent bonds along the backbone.
c. The glass transition temperature of a material is normally above its melting temperature.
d. The elastic modulus of a polymer decreases when it is heated above its glass transition temperature

User Age Mooij
by
6.9k points

1 Answer

3 votes

Answer:

The answer is goin to be a because it is your best luck

Step-by-step explanation:

And the explanation is b the answer

User Dvlsg
by
6.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.7m questions

10.3m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!