Question

A bar magnet is cut in half, as shown.

A bar magnet oriented horizontally labeled N to the left and S to the right. A dotted line runs vertically down from above the magnet to below through the center of the magnet.


Which shows the pieces after the magnet is cut?


2 pieces of broken magnet with a jagged edge on the inside side of each piece. On the left a piece labeled N S from left and on the right a piece labeled N S from left.

2 pieces of broken magnet with a jagged edge on the inside side of each piece. On the left a piece labeled N S from left and on the right a piece labeled S N from left.

2 pieces of broken magnet with a jagged edge on the inside side of each piece. On the left a piece labeled N and on the right a piece labeled S.

2 pieces of broken magnet with a jagged edge on the inside side of each piece. On the left a piece labeled S and on the right a piece labeled N.

Answer 1

B is the answer

Step-by-step explanation:

Answer 2

2 pieces of broken magnet with a jagged edge on the inside side of each piece. On the left a piece labeled N S from left and on the right a piece labeled S N from left.

Is correct.

Step-by-step explanation:

The very last part of this statement shows from the left it is read SN it would be SN even though it was once NS, it is read from the left, and the letters are now upside down and only the bottom part of the SN is recognizable as SN upside down is.

As both were read horizontally before they were cut and laid vertically during the cut why else would a dotted line be shown as central cut.

It simply would nt have touched the letters if they were labelled on the arms of the U. OR none would have separated at all.

Or none would have ever been cut vertically or central.