Register
You are not changing the carrier signal, only the message. In the scope the center Page 5 of 6 frequency should remain at 14kHz, the frequency span at 20kHz and the dB/div at 15dB. Here are the AM signal
26.7k views
3 votes
You are not changing the carrier signal, only the message. In the scope the center Page 5 of 6 frequency should remain at 14kHz, the frequency span at 20kHz and the dB/div at 15dB. Here are the AM signal in time domain and its frequency spectrum. Explain what you see. (Hint: Remember the Fourier analysis of the square wave performed in Lab #3.)

User Rahul Modi
by
5.6k points

1 Answer

4 votes

Answer:

We will see a waveform displayed on the screen and it will be PWM(pulse width modulation) of sinusoidal wave,this wave should have a frequency of 14KHz and it will form a vibration spectrum.

User Shawn Mclean
by
6.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.5m questions

8.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!