Register
A voltage regulator is to provide a constant DC voltage Vl=10V to a load Rl from a nominal Vcc=15V supply voltage. The load can vary from 20Ω to 1KΩ. The supply voltage Vcc can vary from 13V to 16V. The
217k views
1 vote
A voltage regulator is to provide a constant DC voltage Vl=10V to a load Rl from a nominal Vcc=15V supply voltage. The load can vary from 20Ω to 1KΩ. The supply voltage Vcc can vary from 13V to 16V. The op-amp can provide a maximum output current of 20mA. a)Find the βnecessary for the transistor to provide the needed current. b)Find the maximum power the transistor must dissipate.

User Peter Hornsby
by
8.2k points

1 Answer

6 votes

Answer:

Beta values can be from the equation=change in Vcc/nominal Vcc

Beta=16-3/15=3/15=1/5=0.20

Maximum power=I^2*R=40 W

User Ranjith Varatharajan
by
7.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.5m questions

11.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!