Register
The rotor is driven at ????m = 120π rad/sec. If the stator winding carries a current of 5 A (rms) at 60 Hz, determine the instantaneous voltage and rms voltage induced in the rotor coil. Determine the
208k views
2 votes
The rotor is driven at ????m = 120π rad/sec. If the stator winding carries a current of 5 A (rms) at 60 Hz, determine the instantaneous voltage and rms voltage induced in the rotor coil. Determine the frequency of the rotor induced voltage. (b) Suppose the stator and rotor coils are connected in series and a current of 5

User Clinton Prakash
by
5.1k points

1 Answer

3 votes

Answer:

(a) Frequency induced voltage of motor is 120 Hz

(b) The speed at which the machine will produce an average torque is 240π rad/s. Maximum Torque is 1.0 Nm

Step-by-step explanation:

The rotor is driven at ????m = 120π rad/sec. If the stator winding carries a current-example-1
The rotor is driven at ????m = 120π rad/sec. If the stator winding carries a current-example-2
User Atxe
by
5.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.8m questions

7.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!