Register
A hollow aluminum alloy [G = 3,800 ksi] shaft having a length of 12 ft, an outside diameter of 4.50 in., and a wall thickness of 0.50 in. rotates at 3 Hz. The allowable shear stress is 6 ksi, and the allowable
174k views
3 votes
A hollow aluminum alloy [G = 3,800 ksi] shaft having a length of 12 ft, an outside diameter of 4.50 in., and a wall thickness of 0.50 in. rotates at 3 Hz. The allowable shear stress is 6 ksi, and the allowable angle of twist is 5°. What horsepower may the shaft transmit?

User Sunil Tc
by
7.1k points

1 Answer

4 votes

Answer:

Horse power = 167.84 hp

Step-by-step explanation:

Horsepower is calculated using the formula;

P = T * w

See the attached file for the calculation

A hollow aluminum alloy [G = 3,800 ksi] shaft having a length of 12 ft, an outside-example-1
A hollow aluminum alloy [G = 3,800 ksi] shaft having a length of 12 ft, an outside-example-2
User Matt Wonlaw
by
7.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.8m questions

10.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!