Question

swenson Saws produces bows, frame, dovetail, and tenon saws used by craft furniture makers. During an 8-hour shift, a saw is produced every 6 minutes. The demand for the bow, frame, and dovetail saws is about the same, but the demand tenon saw is twice the demand for the other three. a) If mixed-model scheduling is used, how many of each saw will be produced before the cycle is repeated? b) determine a satisfactory production sequence for one unit production. How often is this sequence repeated? c) how many of each saw does Swenson produce in one shift?

Answer 1

Given: Total shift time = 8 hours = 8 * 60 = 480 minutes

time required for production of one saw = 6 minute

Demand for Bow saw = Demand for frame saw = Demand for dovetail saw = 1/2 * Demand of Tenon saw

a) Mixed model schedule:

Mixed model schedule

Product no. per batch

Bow Saw 1

Frame Saw 1

Dovetail Saw 1

Tenon Saw 2

Total 5

Therefore 2 Tenon Saw, and each bow, frame, and dovetail saws will be produced before the cycle is repeated.

b) 2 Tenon Saw, 1 bow, 1 frame, and 1 dovetail saws will be produced under production sequence for one unit production.

The length of cycle will be 5*6=30 minutes i.e. the cycle will repeat once in 30 minutes for 8 hours means totally it will repeat 16 times during one shift.

c) Number of saws Swenson produce in one shift = Number of Bow saw Swenson produce in one shift + Number of Frame saw Swenson produce in one shift + Number of Dovetail saw Swenson produce in one shift + Number of Tenon saw Swenson produce in one shift

Number of saws Swenson produce in one shift = 480\div 30\times 1 + 480\div 30\times 1 + 480\div 30\times 1 + 480\div 30\times 2 = 16 + 16 + 16 + 32 = 80 saws per shift

Answer 2

Given: Total shift time = 8 hours = 8 * 60 = 480 minutes

time required for production of one saw = 6 minutes

Demand for Bow saw = Demand for frame saw = Demand for dovetail saw = 1/2 * Demand of Tenon saw

a) Mixed model schedule:

Mixed model schedule

Product no. per batch

Bow Saw 1

Frame Saw 1

Dovetail Saw 1

Tenon Saw 2

Total 5

Therefore 2 Tenon Saw, and each bow, frame, and dovetail saws will be produced before the cycle is repeated.

b) 2 Tenon Saw, 1 bow, 1 frame, and 1 dovetail saws will be produced under production sequence for one unit production.

The length of cycle will be 5*6=30 minutes i.e. the cycle will repeat once in 30 minutes for 8 hours means totally it will repeat 16 times during one shift.

c) Number of saws Swenson produce in one shift = Number of Bow saw Swenson produce in one shift + Number of Frame saw Swenson produce in one shift + Number of Dovetail saw Swenson produce in one shift + Number of Tenon saw Swenson produce in one shift

Step-by-step explanation: