Question

Hot carbon dioxide exhaust gas at 1 atm is being cooled by flat plates. The gas at 220 °C flows in parallel over the upper and lower surfaces of a 1.5-m-long flat plate at a velocity of 3 m/s.

If the flat plate surface temperature is maintained at 80 °C, determine (a) the local convection heat transfer coefficient at 1 m from the leading edge, (b) the average convection heat transfer coefficient over the entire plate, and (c) the total heat flux transfer to the plate.

Answer 1

The local convection heat transfer coefficient at 1 m from the leading edge is
`0.44 (W)/(m^(2) * K)` , the average convection heat transfer coefficient over the entire plate is
`0.293 (W)/(m^(2) * K)`and the total heat flux transfer to the plate is
`61.6 KJ`.

Step-by-step explanation:

It is case of heat and mass transfer in which due to temperature difference between gas and surface. Further temperature boundary layer will developed on flat plate in longitudinal direction.

Hot carbon dioxide exhaust gas

physical properties

`r= 1.05 (kg)/(m^(3))`

`c_p = 1.02 (kJ)/(Kg * K)`

`m= 231 * 10^(7) (N * s )/(m^2)`

υ =
`21.8 * 10^(6) (m^2)/(s)`

`k = 32.5 * 10^(3) (W)/(m * K)`

`\alpha = 30.1 * 10^(6) (m^(2))/(s)`

`Pr = 0.725`

Apart from these other data arr given below,

`v= 3 (m)/(s) \\ p= 1 atm \\ L_c = 1.5m \\T_g= 220 C \\ T_s = 80 C`

To find the local convection heat transfer coefficient at 1 m from the leading edge, we use correlation used for laminar flow over flat plate,

`Nu = ( h * L )/(k) = 0.332 * (Re^{(1)/(2) }) * (Pr^{(1)/(3) })`

where h= Average heat transfer coefficient

L= Length of a plate

k= Thermal Conductivity of carbon dioxide

Re = Reynold's Number

Pr = Prandtle Number

(a) Convection heat transfer coefficient at 1 m from the leading edge

is referred as local convection heat transfer coefficient.

To find convection heat transfer coefficient at 1 m from leading edge,

`Nu = ( h_local * L )/(k) = 0.332 * (Re^{(1)/(2) }) * (Pr^{(1)/(3) })`

Here, first we have to find Re and Pr,

`Re = (r * v * L)/(m)`

`Re = (1.0594 * 3 * 1)/(231 * 10^(7))`

`Re = 20.63 * 10^(-10)`

Pr number is take from physical property data and Pr is 0.725.

Putting value of Re and Pr in main equation,

we get

`Nu = ( h_local * 1 )/(32.5 * 10^(3)) = 0.332 * ( (20.63 * 10^(-10))^{(1)/(2) }) * (0.725^{(1)/(3) })`

`h_local = 32.5 * 10^(3) * 0.332 * ( (20.63 * 10^(-10))^{(1)/(2) }) * (0.725^{(1)/(3) })`

`h_local = 0.44 (W)/(m^(2) * K)`

(b) To find average convection heat transfer coefficient,

it can be find out as case (a), only difference is that instead of L=1 m, L=1.5 m would come,

Therefore,

`Nu = ( h * 1.5 )/(32.5 * 10^(3)) = 0.332 * ( (20.63 * 10^(-10))^{(1)/(2) }) * (0.725^{(1)/(3) })`

Finally,

`h = (0.44)/(1.5)`

`h = 0.293 (W)/(m^(2) * K)`

(C) Total heat flux transfer to the plate is found out by,

`Q = h * (T_g - T_s)`

`Q = 0.293 * (220-80) \\ Q= 0.293 * 140 \\ Q= 61.6 KJ`