Register
You will be observing laminar-turbulent transition for room temperature (about 20°C) water flowing in a 0.602"" ID pipe (Schedule 40 1/2"" pipe). Estimate the flow rate in gallons/minute (gpm) at which
4.2k views
1 vote
You will be observing laminar-turbulent transition for room temperature (about 20°C) water flowing in a 0.602"" ID pipe (Schedule 40 1/2"" pipe). Estimate the flow rate in gallons/minute (gpm) at which transition should begin (ReD= 2300) and the flow rate for fully turbulent flow (ReD> 4000). Repeat calculations for a 0.804"" ID pipe (Schedule 40 3/4"" pipe).

User Milkovsky
by
4.4k points

1 Answer

4 votes

Answer:

b) 0.7667gallons/minutes

Step-by-step explanation:

check the attachment below for other answers

You will be observing laminar-turbulent transition for room temperature (about 20°C-example-1
You will be observing laminar-turbulent transition for room temperature (about 20°C-example-2
User Naster
by
4.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.2m questions

6.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!