Register
Stainless steel, type 304 having a density of 7.86 g/cm3, has been used in some reactors. The nominal composition by weight of this material is as follows: carbon, 0.08%; chromium, 19%; nickel, 10%; iron,
172k views
1 vote
Stainless steel, type 304 having a density of 7.86 g/cm3, has been used in some reactors. The nominal composition by weight of this material is as follows: carbon, 0.08%; chromium, 19%; nickel, 10%; iron, the remainder. Calculate the macroscopic absorption cross-section of SS-304 at 0.0253 eV.

User Anurodh Singh
by
8.5k points

1 Answer

1 vote

Answer:

the macroscopic absorption cross-section of SS-304 at 0.0253 eV

=0.242700cm∧-1

Step-by-step explanation:

for the step to step explanation check the attachment.

Stainless steel, type 304 having a density of 7.86 g/cm3, has been used in some reactors-example-1
Stainless steel, type 304 having a density of 7.86 g/cm3, has been used in some reactors-example-2
User Alex Martelli
by
8.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Vitrification is a process of: a. Chemical reaction bonding of aggregate ceramic powder b. Cementing aggregate ceramic powder with a liquefied material c. Solid-state diffusion of aggregate ceramic powder
Link Copied!