You originally designed a system to control two motors with the following conditions and hardware: (1) Motor A (240V, 30A, 3Phase) operation is controlled by a magnetic motor starter (MMS) which contains a NO. Aux Contact (2) Motor A, is to START, and remain running when an operator presses a single N.O. push button (3) TO STOP Motor A. independent operators must simultaneously press two N.C. push buttons (4) Motor B (240V, 20A, 1 Phase) operation is controlled by a MMS which contains a N.O. Auxiliary Contact (5) Motor B can only operate if Motor A is running, and is controlled with a start-stop-station. Unfortunately, you received the opposite (3.N.O. push buttons, and 2.N.C. push buttons). After scrounging around you have the following hardware: a.2-120V MMS with N.Q. Aux Contacts b.1-NO Push Buttons c.2-120V Relays with NO and N.CCortacts d.2-N.C.Push Buttons II 13:39 15:14 1.00x