Register
A liquid water turbine receives 2 kg / s water at 2000 kPa, 20°C with a velocity of 15 m / s . The exit is at 100 kPa, 20°C, and very low velocity. Find the specific work and the power produced.
96.2k views
2 votes
A liquid water turbine receives 2 kg / s water at 2000 kPa, 20°C with a velocity of 15 m / s . The exit is at 100 kPa, 20°C, and very low velocity. Find the specific work and the power produced.

User Sjharrison
by
7.1k points

1 Answer

5 votes

Peppa Pig sjsjssjssjsjsjsjsjssjjsss

User Utarid
by
7.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.1m questions

10.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!