Register
Air, at a pressure of 700 kPa and a temperature of 80°C, flows through a convergent– divergent nozzle. The inlet area is 0.005 m2 and the pressure on the exit plane is 40 kPa. If the mass flow rate through
132k views
3 votes
Air, at a pressure of 700 kPa and a temperature of 80°C, flows through a convergent– divergent nozzle. The inlet area is 0.005 m2 and the pressure on the exit plane is 40 kPa. If the mass flow rate through the nozzle is 1 kg/s, find, assuming onedimensional isentropic flow,

User Hrokr
by
3.3k points

1 Answer

3 votes

Answer: The complete part of the question is to find the exit velocity

Step-by-step explanation:

Given the following parameters

Inlet pressure = 700kpa

outlet pressure = 40kpa

Temperature = 80°C = 353k

mass flow rate = 1 kg/s

The application of the continuity and the bernoulli's equation is employed to solve the problem.

The detailed steps and the appropriate formula is as shown in the attached file.

Air, at a pressure of 700 kPa and a temperature of 80°C, flows through a convergent-example-1
User Sumit Gupta
by
4.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.6m questions

4.6m answers

Other Questions

Implement this C program by defining a structure for each payment. The structure should have at least three members for the interest, principle and balance separately. And store all the payments in a structure
Solving for dominant strategies and the Nash equilibrium Suppose Andrew and Beth are playing a game in which both must simultaneously choose the action Left or Right. The payoff matrix that follows shows
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
Name the author the "the journey to the centre of the earth"​
The fully corrected endurance strength for a steel rotating shaft is 42 kpsi, the ultimate tensile strength is 120 kpsi, the yield strength Sy=65 kpsi, and the fatigue stress correction factor Kf = 1.96.
Link Copied!