Register
Which of the following is correct oil viscosity for hybrid electric vehicle? A. SAE 10W-30 B. SAE 5W-20 C. SAE 0W-10 D. SAE 5W-30
256 views
5 votes
Which of the following is correct oil viscosity for hybrid electric vehicle?

A. SAE 10W-30
B. SAE 5W-20
C. SAE 0W-10
D. SAE 5W-30

User Shemika
by
4.6k points

1 Answer

7 votes

SAE 0W-10 is the correct oil viscosity for hybrid electric vehicle.

Step-by-step explanation:

  • The lubricant hydrodynamic friction which minimizes the viscosity grade and allows the fuel economy significantly.
  • The benefits are the cold oil and other conditions for temperature.
  • The grade of viscosity is very less and the oil improves the flow for the start up, the oil pressure fasts the delivery to build up, the raisings are fastly reversed and reached the fast temperature.
  • The requirement of hybrid electric vehicle also meets and there will be multiples of starts and stops of the gasoline engine during the different phases of hybrid vehicle.
User Nicholas Boll
by
5.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.6m questions

7.3m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!