Register
Air at 105 kPa and 37° C flows upward through a6-cm-diameter inclined duct at a rate of 65 L/s. The duct diameter is then reduced to 4 cm through a reducer. The pressure change across the reducer is measured
86.5k views
2 votes
Air at 105 kPa and 37° C flows upward through a6-cm-diameter inclined duct at a rate of 65 L/s. The duct diameter is then reduced to 4 cm through a reducer. The pressure change across the reducer is measured by a water manometer. The elevation difference between the two points on the pipe where the two arms of the manometer are attached is 0.20 m. Determine the differential height between the fluid levels of the two arms of the manometer.

User Marco Fumagalli
by
7.3k points

1 Answer

5 votes

Answer:

0.129 m

Step-by-step explanation:

See attached picture for step by step explanation.

Air at 105 kPa and 37° C flows upward through a6-cm-diameter inclined duct at a rate-example-1
Air at 105 kPa and 37° C flows upward through a6-cm-diameter inclined duct at a rate-example-2
Air at 105 kPa and 37° C flows upward through a6-cm-diameter inclined duct at a rate-example-3
Air at 105 kPa and 37° C flows upward through a6-cm-diameter inclined duct at a rate-example-4
Air at 105 kPa and 37° C flows upward through a6-cm-diameter inclined duct at a rate-example-5
User Dineshprasanna
by
7.6k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!