Register
In an Otto Cycle, the volume before compression is 0.006 m3, the pressure is 101400 Pascals, and the temperature is 500 K. If the compression ratio is 12, what is the volume after compression
24.1k views
4 votes
In an Otto Cycle, the volume before compression is 0.006 m3, the pressure is 101400 Pascals, and the temperature is 500 K. If the compression ratio is 12, what is the volume after compression

User Tree
by
7.0k points

1 Answer

4 votes

Answer:

5*10⁻⁴ m³

Step-by-step explanation:

See attached picture.

In an Otto Cycle, the volume before compression is 0.006 m3, the pressure is 101400 Pascals-example-1
User Mahdi Rafatjah
by
7.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.9m questions

10.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!