Register
A specimen of aluminum having a rectangular cross section 9.6 mm × 12.9 mm (0.3780 in. × 0.5079 in.) is pulled in tension with 35400 N (7958 lbf) force, producing only elastic deformation. The elastic
196k views
3 votes
A specimen of aluminum having a rectangular cross section 9.6 mm × 12.9 mm (0.3780 in. × 0.5079 in.) is pulled in tension with 35400 N (7958 lbf) force, producing only elastic deformation. The elastic modulus for aluminum is 69 GPa (or 10 × 106 psi). Calculate the resulting strain.

User Jonathan Delean
by
7.3k points

1 Answer

3 votes

Answer:

The resultant strain in the aluminum specimen is 4.233*10^(-3).

Step-by-step explanation:

A specimen of aluminum having a rectangular cross section 9.6 mm × 12.9 mm (0.3780 in-example-1
User BorisTB
by
8.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.3m questions

12.0m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!