Register
g A plane stress element has components sigma x = 160 MPa, tau xy = 100 MPa (CW). Determine the two values pf sigma y for which the maximum shear stress is 73 MPa.
107k views
2 votes
g A plane stress element has components sigma x = 160 MPa, tau xy = 100 MPa (CW). Determine the two values pf sigma y for which the maximum shear stress is 73 MPa.

User Dunith Dhanushka
by
3.2k points

1 Answer

2 votes

Answer:

The question is mentioned in the attachment.

Step-by-step explanation:

g A plane stress element has components sigma x = 160 MPa, tau xy = 100 MPa (CW). Determine-example-1
g A plane stress element has components sigma x = 160 MPa, tau xy = 100 MPa (CW). Determine-example-2
User Michael Stachura
by
4.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.3m questions

4.3m answers

Other Questions

Implement this C program by defining a structure for each payment. The structure should have at least three members for the interest, principle and balance separately. And store all the payments in a structure
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
The fully corrected endurance strength for a steel rotating shaft is 42 kpsi, the ultimate tensile strength is 120 kpsi, the yield strength Sy=65 kpsi, and the fatigue stress correction factor Kf = 1.96.
Regulation 433.3.3 gives six examples where th are permitted for safety reasons. Can you fill in the missing words? Exciter Drop zone for rotating machines. Supply circuits of lifting Dron zone
Engine oil flows through a 25‐mm‐diameter tube at a rate of 0.5 kg/s. The oil enters the tube at a temperature of 25°C, while the tube surface temperature is maintained at 100°C. For a 100‐m long tube,
Link Copied!