Register
The motor draws in the cable with an acceleration of 3 m/s2. The beam has a uniform mass of 30 kg/m , and the crate has a mass of 200 kg Neglect the mass of the motor and pulleys. Determine the reactions
27.8k views
2 votes
The motor draws in the cable with an acceleration of 3 m/s2. The beam has a uniform mass of 30 kg/m , and the crate has a mass of 200 kg Neglect the mass of the motor and pulleys. Determine the reactions at supports A and B.

User Bakhshi
by
6.9k points

1 Answer

5 votes

Answer:

See the attached pictures for answer.

Step-by-step explanation:

See the attached pictures for explanation.

The motor draws in the cable with an acceleration of 3 m/s2. The beam has a uniform-example-1
The motor draws in the cable with an acceleration of 3 m/s2. The beam has a uniform-example-2
The motor draws in the cable with an acceleration of 3 m/s2. The beam has a uniform-example-3
User RVM
by
7.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.8m questions

10.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!