Register
A 30cm long field sample is tested in a falling head permeameter with a 10 cm diameter cylinder. the diameter of the tube is 10mm. the water level in the tube is 35cm above the outlet level after one hour
191k views
3 votes
A 30cm long field sample is tested in a falling head permeameter with a 10 cm diameter cylinder. the diameter of the tube is 10mm. the water level in the tube is 35cm above the outlet level after one hour of operation, while the level drops to 22cm after 12 hours of operation. find the hydraulic conductivity of the sample.

User Jay Traband
by
5.2k points

1 Answer

5 votes

Answer:

k=3.22 * 10^-6 cm/sec

Step-by-step explanation:

See the attached picture for explanation.

A 30cm long field sample is tested in a falling head permeameter with a 10 cm diameter-example-1
User Attika
by
5.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.8m questions

7.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!