Register

If, when a relay is energized, you measure 0.05 VAC across a set of normally open contacts, the A. relay is operating properly B. contacts must be burnt C. contacts must be pitt…

If, when a relay is energized, you measure 0.05 VAC across a set of normally open contacts, the A. relay is operating properly B. contacts must be burnt C. contacts must be pitt…
232k views
4 votes
If, when a relay is energized, you measure 0.05 VAC across a set of normally open contacts, the A. relay is operating properly B. contacts must be burnt C. contacts must be pitted D. coil is open

User Abhiarora
by
8.0k points

1 Answer

4 votes

Answer: A

Step-by-step explanation:

It means the relay is working properly.

User Lakenya
by
7.8k points
← Prev Question Next Question →

Related questions

User Charklewis
asked Dec 26, 2024 125k views
When a relay with both Normally Open and Normally Closed Contacts is energized, which contact is closed?
Charklewis asked Dec 26, 2024
by Charklewis
7.7k points
1 answer
4 votes
125k views
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Categories

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!