Question

After upgrading a video driver, the screen becomes unresponsive.You need to get the system working properly with the least amount of effort and time.What should you do?A. During the boot process, press F8 and boot into Safe Mode to roll back the driver.B. Replace your current graphics adapter.C. Reinstall Windows 7 on your desktop computer.D. During the boot process, press F8 and use System Recovery options

Answer 1

Answer and Explanation:

The IDE/PATA technology was design in raw edges. The IDE(Integrated Drive Electronics) drives, also known as PATA (Parallel AT Attachment) drives, is an outdated interface based on the 16-bit industry-standard architecture of the IBM PC. Older storage devices have used it to connect to the motherboard and transfer data. The IDE can also use with other devices such as CD / DVD drives, zip drives, and tape drives.

An IDE/PATA hard drive cable is a ribbon cable containing 40 pins. This cable also plays a vital role in data transfer speed. It's from 133 MBps or 100 MBps down to 66 MBps, 33 MBps, or 16 MBps, depending on the cable.

Answer 2

A. During the boot process, press F8 and boot into Safe Mode to roll back the driver.

Step-by-step explanation:

In most cases, this kind of issue is applicable to a laptop or computer that is running Windows 7. After the video driver is upgraded and it is observed that the screen is not responsive. In order to ensure that the system is functioning properly with the lowest amount of time/effort, it is vital to press the key 'F8' and ensure that the booting is in Safe Mode to roll back the video driver.